Ram 1500/2500/3500: Hard-Keys
Hard-Keys are located below the Uconnect system in the center of the instrument panel. In addition, there is a Scroll/Enter control knob located on the right side of the Climate Controls in the center of the instrument panel.
Turn the control knob to scroll through menus and change settings (i.e., 30, 60, 90), press the center of the control knob one or more times to select or change a setting (i.e., ON, OFF).
Your Uconnect system may also have a Screen Off and Back hard-keys located below the system.
Press the Screen Off hard-key to turn off the Uconnect screen. Press the Screen Off hard-key a second time to turn the screen on.
Press the Back hard-key to exit out of a Menu or certain option on the Uconnect system.
READ NEXT:
Soft-Keys
Soft-Keys are accessible on the Uconnect display.
Customer Programmable Features - Uconnect
5.0/8.4 Settings
Uconnect 5.0 - Press the SETTINGS hard-key to display
the menu setting screen. Uconnect 8.4
Soft-Keys - Display
After pressing the "Display" soft-key the following settings
will be available.
Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, touch and
r
Soft-Keys - Safety & Driving Assistance
After pressing the "Safety & Driving Assistance" soft-key
the following settings will be available.
Park Assist
The Rear Park Assist system will scan for objects behind
the vehicle when the tra
SEE MORE:
Driver And Passenger Advanced Front Air Bag
Inflator Units
The Driver and Passenger Advanced Front Air Bag
Inflator Units are located in the center of the steering
wheel and on the right side of the instrument panel.
When the ORC detects a collision requiring the Advanced
Front Air Bags, it signals the inflator units. A large
quantity of non-toxic gas is g
Programming The Memory Feature
NOTE: To create a new memory profile, perform the
following:
Vehicles Equipped With Keyless Enter-N-Go
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine).
2. Adjust all memory profile settings to desired pre
© 2020-2026 Copyright www.ram-manuals.com
