Ram 1500/2500/3500: Tri-Fold Tonneau Cover - If Equipped
Ram Truck 1500 2500 3500 (2009 - 2018) Owner's Manual / Understanding The Features Of Your Vehicle / Tri-Fold Tonneau Cover - If Equipped
Your vehicle may be equipped with a Tri-Fold Tonneau Cover which consists of different features:
- Easy Tri-Fold cover
- Tonneau fore aft locator
- Crosscar inside bed locator
- Front and rear clamps
- Stowage strap
- Locking Capability
NOTE: The Tonneau Cover can be folded up and secured at the front of the box without removing completely.
READ NEXT:
Tri-Fold Tonneau Cover Removal
To remove the Tonneau Cover follow the following steps:
1. Lower the tailgate to gain access to the first set of two
tonneau cover clamps located on the driver and passengers
bottom side of the tonnea
Tri-Fold Tonneau Cover Installation
To install the Tonneau Cover follow the following steps:
1. Position the folded Tonneau Cover on the truck bed
and push the Cover forward against the front of the
truck bed. The Tonneau Cover centers
SEE MORE:
Operating Your Winch
WARNING!
Failure to observe any of these warnings regarding
proper winch usage may result in severe injury.
Always use supplied hook strap to hold the hook
when spooling wire rope in or out.
Never use as a hoist.
Never use to move persons.
Never exceed winch or wire rope rated capacity.
Alway
Driver's Power Seat - If Equipped
Some models may be equipped with an eight-way power
driver's seat. The power seat switches are located on the outboard side of the
driver's seat cushion. There are two
power seat switches that are used to control the movement
of the seat cushion and the seatback.
Power Seat Switches
Power Seat S
© 2020-2026 Copyright www.ram-manuals.com
