Ram 1500/2500/3500 Owners & Service Manuals

Ram 1500/2500/3500: Power Folding Outside Mirrors - If Equipped

If equipped with power folding mirrors, they can be electrically folded rearward and unfolded into the drive position.

The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right).

Press the switch once and the mirrors will fold in, press the switch a second time and the mirrors will return to the normal driving position.

If the mirror is manually folded after electrically cycled, a potential extra button push is required to get the mirrors back to the home position. If the mirror does not electrically fold check for ice or dirt build up at the pivot area which can cause excessive drag.

Mirrors
Power Folding Mirror Switch

Resetting the Power Folding Outside Mirrors

You may need to reset the power folding mirrors if the following occurs:

  • The mirrors are accidentally blocked while folding.
  • The mirrors are accidentally manually folded/ unfolded.
  • The mirrors come out of the unfolded position.
  • The mirrors shake and vibrate at normal driving speeds.

To reset the power folding mirrors: Fold and unfold them by pressing the button (this may require multiple button pushes). This resets them to their normal position.

    READ NEXT:

     Power Mirrors - If Equipped

    The controls for the power mirrors are located on the driver's door trim panel. Power Mirror Controls Location The power mirror controls consist of mirror select buttons and a four-way mirror control

     Illuminated Vanity Mirror - If Equipped

    Illuminated vanity mirrors are located on each sun visor. To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights will turn on automatically. Closing the mirror co

     Seats

    Seats are a part of the Occupant Restraint System of the vehicle. WARNING! It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are

    SEE MORE:

     Lap/Shoulder Belt Operating Instructions

    1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, next to your arm in the rear seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go a

     Driving On Slippery Surfaces

    Acceleration Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the rear (driving) wheels. WARNING! Rapid acceleration on slippery s

    © 2020-2026 Copyright www.ram-manuals.com