Ram 1500/2500/3500 Owners & Service Manuals

Ram 1500/2500/3500: Soft-Keys - Lights

After pressing the Lights soft-key the following settings will be available.

  • Headlight Off Delay

When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. To make your selection, scroll up or down until the preferred setting is highlighted, then press and release the SELECT button until a checkmark appears next to the setting, showing that the setting has been selected.

  • Headlight Illumination On Approach

When this feature is selected, the headlights will activate and remain on for 0, 30, 60, or 90 seconds when the doors are unlocked with the Remote Keyless Entry (RKE) transmitter. To change the Illuminated Approach status, touch the + or - soft-key to select your desired time interval. Touch the back arrow soft-key to return to the previous menu.

  • Headlights With Wipers - If Equipped

When this feature is selected, and the headlight switch is in the AUTO position, the headlights will turn on approximately 10 seconds after the wipers are turned on.

The headlights will also turn off when the wipers are turned off if they were turned on by this feature. To make your selection, touch the Headlights With Wipers softkey, until a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow soft-key to return to the previous menu.

  • Auto Dim High Beam - If Equipped

When this feature is selected, the high beam headlights will deactivate automatically under certain conditions. To make your selection, touch the Auto High Beams soft-key, until a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow soft-key to return to the previous menu. Refer to "Lights/ Automatic High Beam - If Equipped" in "Understanding The Features Of Your Vehicle" for further information.

  • Daytime Running Lights - If Equipped

When this feature is selected, the headlights will turn on whenever the engine is running. To make your selection, touch the Daytime Running Lights soft-key, until a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow soft-key to return to the previous menu.

  • Flash Lamps With Lock

When this feature is selected, the exterior lamps will flash when the doors are locked or unlocked with the Remote Keyless Entry (RKE) transmitter. This feature may be selected with or without the sound horn on lock feature selected. To make your selection, touch the Flash Headlights with Lock soft-key, until a check-mark appears next to setting, showing that setting has been selected.

Touch the back arrow soft-key to return to the previous menu.

    READ NEXT:

     Soft-Keys - Doors & Locks

    After pressing the Doors & Locks soft-key the following settings will be available: Auto Lock When this feature is selected, all doors will lock automatically when the vehicle reaches a speed o

     Soft-Keys - Engine Off Options

    After pressing the Engine Off Options soft-key the following settings will be available. Easy Exit Seats When this feature is selected, the Driver's seat will automatically move rearward once the e

     Soft-Keys - Audio

    After pressing the "Audio" soft-key the following settings will be available: Balance/Fade When in this display you may adjust the Balance and Fade settings. Equalizer When in this display you m

    SEE MORE:

     Wheel And Tire Torque Specifications

    Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle the lug nuts/bolts should be torqued using a properly calibrated torque wrench. Torque Specifications **Use only Chrysler recomm

     Soft-Keys - Display

    After pressing the "Display" soft-key the following settings will be available. Display Mode When in this display you may select one of the auto display settings. To change Mode status, touch and release the "Day." "Night" or "Auto" soft-key. Then touch the back arrow soft-key. Display Brightne

    © 2020-2024 Copyright www.ram-manuals.com