Ram 1500/2500/3500: Maintaining Your Vehicle

 Programming A Non-Rolling Code

For programming Garage Door Openers manufactured before 1995. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand - held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to program. 3. Simultaneously press and hold both the HomeLink button you want to

 Reinstalling The Jack And Tools (1500 Series)

1. Tighten the jack all the way down by turning the jack turn-screw counterclockwise until the jack is snug. 2. Position the jack and tool bag. Make sure the lug wrench is under the jack near the jack turn-screw. Jack And Tool Bag 3. Secure the tool bag straps to the jack. Jack And Tools Tied 4.