Ram 1500/2500/3500: Things To Know Before Starting Your Vehicle
Ram Truck 1500 2500 3500 (2009 - 2018) Owner's Manual / Things To Know Before Starting Your Vehicle
- A Word About Your Keys
- Sentry Key
- Vehicle Security Alarm
- Illuminated Entry
- Remote Keyless Entry (RKE)
- Remote Starting System - If Equipped
- Door Locks
- Keyless Enter-N-Go
- Windows
- Occupant Restraints
- Lap/Shoulder Belts
- Lap/Shoulder Belt Operating Instructions
- Adjustable Upper Shoulder Belt Anchorage
- Seat Belts In Passenger Seating Positions
- Automatic Locking Retractor (ALR) Mode - If Equipped
- Enhanced Seat Belt Use Reminder System (BeltAlert)
- Supplemental Restraint System (SRS) - Air Bags
- Advanced Front Air Bag Features
- Air Bag Deployment Sensors And Controls
- Driver And Passenger Advanced Front Air Bag Inflator Units
- Maintaining Your Air Bag System
- Event Data Recorder (EDR)
- Child Restraints
- Lower Anchors And Tethers For Children (LATCH) Restraint System
- Locating The LATCH Anchorages - Quad Cab/Mega Cab/Crew Cab
- Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR)
- Installing A Child Restraint With A Cinching Latch Plate (CINCH) - If Equipped
- Installing Child Restraints Using The Top Tether Anchorage
- Engine Break-In Recommendations
- Safety Tips
READ NEXT:
A Word About Your Keys
Your vehicle uses either a key start ignition system or
keyless ignition system. The key start ignition system
consists of a either a bladed key with an immobilizer chip
in it, or a Key Fob with Remot
Sentry Key
The Sentry Key Immobilizer System prevents unauthorized
vehicle operation by disabling the engine. The
system does not need to be armed or activated. Operation
is automatic, regardless of whether the
Vehicle Security Alarm
The Vehicle Security Alarm monitors the vehicle doors
and ignition for unauthorized operation. When the Vehicle
Security Alarm is activated, interior switches for
door locks are disabled. The system p
SEE MORE:
ParkSense Sensors
The four ParkSense sensors, located in the rear fascia/
bumper, monitor the area behind the vehicle that is
within the sensors' field of view. The sensors can detect
obstacles from approximately 12 in (30 cm) up to 59 in (150 cm) from the rear
fascia/bumper in the horizontal
direction, depending on
Reinstalling The Jack And Tools (2500 And 3500
Series)
1. Tighten the jack all the way down by turning the jack
turn-screw counterclockwise until the jack is snug.
2. Position the jack and tools into bracket assembly.
Make sure the lug wrench is under the jack near the
jack turn-screw. Snap tools into bracket assembly clips.
Install the jack into bra
© 2020-2025 Copyright www.ram-manuals.com
